$89.95 Buy It Now or Best Offer
free,30-Day Returns
Seller Store arizonacustomgrips
(9771) 99.8%,
Location: Mesa, Arizona
Ships to: US,
Item: 274656689839
All returns accepted:ReturnsNotAccepted
For Gun Make:UBERTI SAA ~ Cattleman, El Patron, Evil Roy, etc.
Material:Aged Magna-Tusk
Material/Finish:Magna-Tusk Aged Distressed Ivory
MPN:Does Not Apply
For Gun Type:UBERTI SAA ~ Cattleman, El Patron, Evil Roy, etc.
Arizona Custom Grips:Arizona Custom Grips
Arizona Custom GripsUBERTI SAA(SINGLE ACTION ARMY REVOLVERS)~ Exclusive ~ MAGNA-TUSK™Aged distressed ivory GRIPSMilled out of a solid block of Magna-Tusk, denser and heavier than regular Ivory or Stag. See below for details.~~~~~two-PIECE (with SCREWHOLE) STYLETHIS AUCTION IS FOR OUR TWO-PIECE (SCREWHOLE) STYLE GRIPS. SEE BELOW.********A Choice for Every User! Two-Piece grips, in addition to a visible screw, have a grip pin installed in the grip frame to help hold them in place. One-Piece grips (grips with no visible screw) use a spacer between the panels, with no screw and no grip pin. Our grips will interchange and work on either style of grip frame. See below. One-Piece style grips (i.e., grips which do not have a visible screwhole in the grips) incorporate a user installed spacer (included with the grips) between the grip panels, as seen on many of the early Colts. This results in a rock-tight fit, without the need of a screw. Preferred by many collectors for their clean lines and traditional look, One-Piece style grips are removed by removing the three backstrap screws, and pulling the grip and backstrap backwards. Reinstallation is in reverse order. Our One-Piece style grips will work on either style gripframe (either One-Piece or Two-Piece style grip frames). Fully illustrated instructions included for quick and easy installation.Alternatively, our Two-Piece style grips (i.e., grips with a visible screw) offer the superior convenience of quick grip removal. Unlike with One-Piece grips, the backstrap need not be removed to remove the grips for cleaning and maintenance of the revolver. Our Two-Piece grips include a free Conversion kit (allowing their use on One-Piece style frames) which replaces the need for a grip pin and is actually a stronger design, and allows the grips to lock up tight, allowing no movement. This requires no modification to your revolver and gives you the advantage of the ease of maintenance of Two-Piece grips, while preserving the integrity of your revolver in original factory condition. Two-Piece style grips were also used on many of the early Colts, and are a traditional and iconic historical design, offering a distinctive look and convenience preferred by many collectors.Fully illustrated, detailed instructions are included with each set of grips. 07082200~~~~~WHAT THESE WILL and WILL NOT FIT – Please read this section in its entirety to ensure you get the correct grip. A few minutes spent now will avoid unnecessary delay later on. This auction is for a set of Genuine Magna-Tusk™ grips for any of the UBERTI made 1873 SAA (Single Action Army) style revolvers, with the standard sized (around 3-1/6” to 3-1/8” tall) “plowhandle” style grip frames. [Please note that these will NOT fit the taller 1860 Army sized 3-3/8” gripframes – see below].These will be marked “Uberti,” and may also (but not necessarily be) marked by the U.S. importer, such as “Cimarron,” “Taylors & Co.”, “Navy Arms”, “Stoeger”, “EMF”, etc. The important thing to determine is that the revolver was made by Uberti and not by some other maker. If you see your revolver listed below, then these grips WILL FIT (subject to the few exceptions noted below). These grips will fit any of the following Uberti-made revolvers with the standard sized “plowhandle” style gripframe: ● Cimarron Uberti revolvers: Buntline; Cattleman; Cattleman II; Chisholm; Desperado; El Patron; Evil Roy; Frisco; Holy Smoker; Hombre; Horseman; Cimarron Model P and Model P Jr.; New Sheriff; Old West; Pistoleer; Rooster Shooter; Short Stroke CMS Pro; Short Stroke SASS Pro; Stallion; Thunderstorm and Thunderstorm CM; US Military Models (Custer 7th Cavalry, U.S. Cavalry Scout, and U.S.V. Artillery); Wyatt Earp Buntline, and Wyatt Earp Cody; ● Taylor’s & Co. Uberti revolvers: Cattleman (NOTE: these will NOT fit the Cattleman .44 Mag which uses the larger 3-3/8” gripframe – see below); Cattleman 12-Shot; Devil Anse; Drifter; Gambler; Old Randall; Outlaw Legacy; Ranch Hand; Runnin’ Iron; Smoke Wagon; Stallion .22, Taylor Gambler; and Taylor Marshall. (Note: will NOT fit the Taylor’s Gunfighter or Gunfighter Defender, both of which use the larger 3-3/8” gripframe – see below);● Also: Will also fit any of Stoeger’s Uberti revolvers; the E.M.F. Dakota II or Dakota III; the American Arms Regulator; or any other Uberti SAA style revolver with the standard sized (3-1/6” to 3-1/8”) plowhandle grip frame.Note: If you do not see your revolver listed, please drop us an email with your model name and we will verify your revolver. UBERTI FRAME VARIATIONS — IMPORTANT!*PLEASE NOTE: Over the years Uberti has used multiple variations of gripframes on their SAA style revolvers, and they are not interchangeable. Accordingly, please attach a note to your order informing us of the two-digit code found in the small rectangular box stamped underneath or on the side of the receiver (or occasionally found under the barrel). This is shown in the second photo as an example. This can be either letters or numbers. Also, please include the first three digits of your serial number. If there is a letter before before your serial number (some will have it and some won’t), please also include that. This will tell us the gripframe variation you have, and we will need this information to make sure you get the correct grips. If we do not receive this information from you, we will send out the most common variation for the latest models. What these WILL NOT FIT: 1. Please note that these grips will NOT fit other makes of revolvers, such as revolvers made by Pietta, Armi San Marco, Colt, Ruger, etc. Also, please note that these grips are made to fit the standard “Plowhandle” shaped (“SAA style”) gripframes only; these grips will NOT fit completely differently shaped gripframes, such as the Bisley, the Birdshead, the Thunderer or the Lightning style gripframes. Please check your revolver to make sure you do not have one of these, or send us a photo of your gripframe if you are unsure. We make grips for all of these different styles which you can find in our store, so please email if you have any questions or cannot find what you need. A photo would of your gripframe or grips be helpful.2. ALSO PLEASE NOTE, as a reminder, these grips are made for STANDARD SIZED grip frames ONLY and WILL NOT FIT any larger (taller) 1860 Army sized grip frames. Please check your grip frame measurement prior to ordering. Your grips or grip frame should measure somewhere between 3-1/16 – 3-1/8” tall, depending on how you hold your ruler, tape, or caliper. Some revolvers use a taller 3-3/8” 1860 Army sized grip. Taylor & Co.’s Gunfighter or Gunfighter Defender, Taylor’s Cattleman 44 Mag., Cimarron’s Bad Boy, the El Patron Grizzly Paw, and the Uberti Callahan, for example, have a taller 3-3/8” grip frame. If you have one of these, our Uberti 1860 Army “Conversion & Metallic Cartridge” grips will fit these revolvers. Please see our store and search under the proper category or email us if you cannot find what you need. IN SUMMARY: 1) Make sure you have the standard “plowhandle” shaped 3-1/8” gripframe and not the taller 3-3/8” frame, and that your revolver was made by UBERTI; and 2) please send us the two-digit code found on your revolver (as shown in the second photo), and the first three digits of your serial number, including the prefixed letter if there is one.Please contact us if you cannot find what you need, or if you have any questions. We are always happy to help.04072200A note on the Italian-produced Revolvers: The Italian firms, located in Northern Italy, have been making SAA style revolvers now for well over a half century, and have made a huge number of makes and models and grip frame profiles with varying configurations over the years. We have an in-depth knowledge of the differing grip configurations, have a large library of gripframe variations from the various makers both old and new, and have vast experience making grips for Uberti, Pietta, Armi San Marco, and the other Italian gunmaking firms. Our experienced makers go to great lengths to ensure an exacting fit, including utilizing modern precision CNC production techniques, as well as incorporating old-time hand tuning and hand checking the fit of every grip on our reference frames prior to leaving our factory. We have a long list of many satisfied customers in the shooting industry who have purchased grips to use in a wide variety of applications, and we can safely and confidently guarantee proper fit and finish to your complete satisfaction.For an additional charge, custom fitting is an option. Please contact us for further details if you are interested in custom fitting. 10232100 Arizona Custom Grips About our exclusive Magna-Tusk™ “Hi-Grade” Ivory and Stag Grips: Magna-Tusk™ Ivory and Stag grips, an exclusive of Arizona Custom Grips, are manufactured out of our super high-grade, ultra-high density material developed exclusively for our premium grip production. Vastly superior to standard bonded ivory or stag found on factory and other aftermarket grips, Magna-Tusk™ is capable of withstanding the heaviest recoil and impact, and is the toughest alternative grip material available today, while still retaining the pristine look of real ivory or stag. It is completely rock-solid, stable, and water, chemical, and oil resistant. It is flame and heat resistant, and is entirely void-free, with over 10x the strength, durability, and impact resistance of alternative materials. Unlike with real ivory or stag, there is no routine care and maintenance involved, with no danger of it drying out and cracking if not maintained properly or if left in the heat. It is filled with premium natural and synthetic compounds to produce outstanding aesthetic properties and mechanical performance. When aged with our exclusive aging process, it takes on the equivalent of a 100-year-old patina, with subtle grain details which many experts cannot tell apart from the real thing. In addition, the material has a fine grain structure, which holds intricate detail for carvings, artistic relief work, etc., found on many historic grips. About Our Aging Process: Unlike the lightweight artificial yellow plastic materials sometimes offered for sale, Magna-Tusk aged grips start out as a solid block of white virgin Magna-Tusk Ivory. Grip blanks are then milled from this premium material, incorporating both CNC techniques for blanking and being finished and polished with the same process used in manufacturing the originals. They are then carefully aged with our exclusive aging process, incorporating concentrated UV light (the essential aging property in natural sunlight), in a hermetically sealed environment. Although this process is a much slower process than artificial coloring methods, the result speaks for itself. Our process produces an authentic appearance and genuine patina which extends into the surface, just like real ivory or stag. Not only does this give it the appearance of authenticity and depth, but this surface will not chip, crack, or peel like a superficially applied coating. Accept no substitutes. With Magna-Tusk aged grips, most experts cannot tell them apart from a decades-old or even a centuries-old original. While the quality difference is somewhat noticeable in the photos, the difference is even more apparent when seen and handled in person. Many of our repeat sales are made by the very customers we sell to, who take their custom-stocked revolvers to the range or club, where the quality difference is immediately seen and appreciated by fellow shooters. Magna-Tusk grips have all the authenticity of the originals, with several improvements over original materials including increased durability, and are made to last a lifetime. They feature subtle but authentic color mottling, grain variegation, and other authentic minute details found on original old Ivory and aged Stag, as seen on many of the revolvers which belonged to gunfighters and lawmen of the Old West. Dense, heavy, and solid, Magna-Tusk grips are in a class all their own. With our exclusive aging process, these grips are outstanding right out of the box, and will continue to improve over time. The more these grips are handled and used, the better they look! 112219 Grip screw included with all grips. The photo used is a stock photo (a sample pair) as we carry an assortment of this style grip. Yours will appear similar to these. Customer satisfaction is important to us — Full Money Back, less shipping, if not fully satisfied!
Frequently Asked Questions About UBERTI MAGNA-TUSK™ ADI IVORY GRIPS ~ Cattleman, Evil Roy, El Patron, Smoke Wagon in My Website
matchanddesign.com is the best online shopping platform where you can buy UBERTI MAGNA-TUSK™ ADI IVORY GRIPS ~ Cattleman, Evil Roy, El Patron, Smoke Wagon from renowned brand(s). matchanddesign.com delivers the most unique and largest selection of products from across the world especially from the US, UK and India at best prices and the fastest delivery time.
What are the best-selling UBERTI MAGNA-TUSK™ ADI IVORY GRIPS ~ Cattleman, Evil Roy, El Patron, Smoke Wagon on matchanddesign.com?
matchanddesign.com helps you to shop online and delivers Zara to your doorstep. The best-selling Zara on matchanddesign.com are: Zara Srpls 4566 300 802 KNTWR 09 Cotton Tank Top Shirt Sz – Grey ZARA BASIC Top Size XS Cream Color Cutout Neckline Womens NEW NWT ZARA NWT PRINTED BLOUSE WITH BOW SIZE M Zara Mock Neck Key Hole Long Sleeve Top Size S Small Green Zara Scarf Tops X2 Size Medium (TM) Zara Sleeveless Top One White Panel And Longer One Side Lovely Top Size… ZARA Black CUT OUT NECKLINE TIE UP BLOUSE TOP XS 6 8 Zara Vibrant Womens High Waist Ankle Skinny Jeans Blue Size 2 0 S Lot 5 Zara Blouse Shirt Top Women’s Size Small Multicolour Abstract Retro 60’s Print Zara Short Sleeve Sweatshirt Coral Size L Zara basic button up blouse top shirt size small casual long-sleeve semi sheer ZARA GREY CRUSHED VELVET LONG SLEEVE V NECK PARTY BODYSUIT TOP BLOUSE 12 M Zara Small UK 8-10 Red Plaid Button Down “snap” Top With Studs And Gems NEW Zara V Neck Crop Top Shirt Blue Womens Medium 16.5×13 NWT Zara V-Neck Top Black 3/4 Length Sleeves Size Medium ZARA WOMAN NWT SS24 SILVER RHINESTONE CROP TOP METAL 4813/308 Women’s Zara Shirt Long Sleeve Size Small ~ Pretty! Zara Top Medium Cream Womens Sleeveless Strappy Blouse Longline Asymetric Zara Women’s Blouse Top Size L Color Black Cotton Long Sleeves Excellent ZARA Off White Blouse Size UK 10 Button Up Hi-Lo Hem Collared Ivory Zara Breton 3/4 Sleeve Stretch Cotton Opened Back Top Size S Brilliant Zara Bodysuit Womens Small Velvet Sleeveless Low Back Tank Brilliant Condition ZARA Womens Light Brown Long Sleeve Casual Shirt Size L Leopard Print Medium By ZARA Womens Animal Leopard Print Button Down Blouse Zara Basic Blouse Women Size Large Grey Sleeveless V-Neck Top ZARA Basic Ladies Shirt Size S Blue Stripe Cotton Mix Blouse Zara Denim Look Blouse lace Neckline Cuffed Sleeves – Size S ZARA BLUE MIX SWIRL LINEN BLOUSE BLOUSE RELAXED FIT SIZE XS UK 8 10 MINI SPECIAL DELIVERY 50 ML / 1.69 OZ (DUMBO) ZARA Unboxed ZARA RED VANILLA 3.0 oz (90 ml) EDT Dress Time 01 Zara Collection T-Shirt Size L ZARA – WOMENS BLACK LACE GUIPURE EMBROIDERED SHEER TOP -SMALL BNWT Oversized ZARA Metallic Stripe Textured Shirt Top Blouse M 12/14 Zara Size Small Super Cool Patterned Ruffle Neck Blouse 70s Style Size 10 Zara Floral Tropical Top Green, Pink & White Blouse Size M UK8 Zara Trafaluc Black Cropped Black Singlet Size M Cotton Basic Classic Zara sleevless tunic pale blue Ladies Zara Size L Floral Blouse Pre Owned. Zara New Women’s Beaded 3/4 Sleeve Blush Pink Knit Crop Top. Size Small Zara Women’s Cropped Denim Tank Top Blue Frayed Hem Size M NWT Zara Women’s Top Short Sleeve XS White, Blend – Other Zara Women’s Shirt S Green 100% Cotton Long Sleeve Collared Basic Zara Basic Lace Trim Camisole Top Animal Print V Neck Spaghetti Straps Size UK 6 Zara Floral Print Blouse Ties Lightweight Size Small Transparent Zara 3/4 sleeves top uk12 Zara Womens Plaid Shirt Red Cotton Long Roll Tab Sleeve Single Pocket Size UK 10 Zara Womens Black Cover Long Sleeve Pullover Blouse Top Size Small ZARA Black White Sheer Top Floral Embroidered Puff Sleeve Blouse L UK 12 Zara Pink Ruffle Blouse Top Size L 12 14 Uk Zara women’s Size M V Neck Long Sleeve Top blouse BNWT Zara floral blouse shirt top sz S 8 10 Ladies Zara Off White Cream Top Size EUR M BNWT ZARA Red Sequin STRAPPY Sparkle Top Blouse Party clubbing FESTIVAL M Medium ZARA Embroidered Top Cream White Cotton Blend Lace Boho Sleeveless Blouse XS Zara Womens Black Long Line Balloon Sleeve Collared Button Down Shirt Size M Zara Short sleeves 100%Linen Cropped Black Crochet Top Large Zara Basic T-shirt- Olive Green, Size Small Ladies Ex Zara 100% cotton Drop Shoulder Plus Size T-shirt Light Sweatshirt Zara Black Top M WOMENS “ZARA BASIC” NAVY TROUSERS SIZE 32″ WAIST GREAT CONDITION Zara Gold White Check Long Sleeve Cropped Shirt Size XS (Hin6) Ladies Zara Dress/long Top Size XS -Black With Contrast Mother Of Pearls Buttons Zara Tee Black Size Small BEAUTIFUL ZARA BLOUSE TOP SIZE EUR L STATEMENT SLEEVES TWEEDY BODY RED WHITE Zara Blue V Neckline Top / Blouse S Zara Basic Collection Women’s Top Blouse Brown Print Pattern Size Small Zara Leopard print top – Size small Zara Woman Orange Top Uk Size XS zara woman tie front black top size large Zara Yellow Multi Colour Striped Shirt Size XS Womens Zara Multicoloured Paisley Floral Boho Ethnic Peasant Chiffon Blouse TopM ZARA TOP Knit Crop Jumper Pink Cropped Oversized Small / 10-12-14 – VGC BNWT Stunning & Unusual ZARA Black Mesh & Guipure Lace Top M 10 Zara Green & Pink Floral Short Sleeve Cotton Womens Ladies Top EUR Small Zara White Tshirt Zara Black Top Womens Small Zara Sleeveless Zip Top Size L Rrp £29.99 Zara Trafaluc Sleeveless Cropped Bralette Top Striped Blue & White Size M Zara Womens Paisley Long Sleeved Button Down Shirts White Green Size XS S Lot 2 Zara Women’s Beige Medium Size Top Zara Ladies Size Small Black High Neck Textured Full Zip Long Sleeve Top Zara bodysuit with plunging neckline black size S Zara textured strapless top size, SMALL. cream Zara Basics Cotton Shirts X 2. White & Blue Striped. Size Small. VGC. NWTZARA FLORAL PRINT DRESS WITH WIDE STAPS Zara Green Polyester Sheer Blouse Size S BNWT RRP 29.99 Zara Floral Printed Shirt Blouse Top Size XS Bloggers Fave Holiday VGC BNWOT ZARA White PLEATED RUCHED BODICE DETAIL BLOUSE TOP S 6 8 10 Zara Blue Top. Pearl Studs. Flutter Sleeves. Navy Blue. Size Eur Medium Zara Cute Blue&White Top/Shirt Size M Zara Women’s T-Shirt M White Graphic 100% Other Short Sleeve Basic Zara ladies blue ruched top t-shirt size M BNWT Zara dark Green Tencel Shirt Top Blouse oversized S Small ZARA WOMAN SS24 WHITE STRETCH KNIT SKATER DRESS ALL SIZES 5584/632 Zara Blouse Womens Size M Uk 14 , Floral Print Blouse , Relaxed fit , Soft NEXT and ZARA Ladies Black and White Blouse Tops size 16 Zara Blouse Size S Zara Woman Blouse Top XS Blue Yellow Multi Floral Short Sleeve Crepe Round Neck NEW ZARA Women’s XL Blue & White Metallic Oversized Cotton Button Front Top NWT Zara Womens Satin Effect Shirt Blouse Barbiecore XS Pink 2143/050 NWT Mens Pullover Fleece Hoodie